Header

Shop : Details

Shop
Details
45,80 €
ISBN 978-3-8440-7969-2
Softcover
126 pages
185 g
24 x 17 cm
English
Thesis
April 2021
Christoph Fröhlich
Modeling and control of servo-pump driven injection molding machines
Injection molding is an important process to produce goods made of plastics. In this process, the polymer granulate is melted and injected into a cooled form. The cyclic injection process consists of the following phases: filling, packing and cooling, plastication, and ejection of the final part.

In this work, a model-based optimal control strategy for the filling and packing phase is developed. During the filling phase, the screw is moved forward by means of two hydraulic cylinders, which injects the molten polymer into the form. A non-return valve prevents backflow of the polymer via the barrel. In the packing phase, a certain pressure-profile is applied to the melt to compensate for shrinking of the polymer during the solidification.

The control tasks of the two phases can be summarized as follows: In the filling phase, the movement of the screw has to be controlled according to a user-defined velocity trajectory. In general, the velocity profile is given as a function of the current screw position. During the filling phase, the system has to be kept below a certain pressure limit. In the subsequent packing phase, a desired pressure-profile is to be tracked as a function of time. In both phases, all the limits of the drive speed, drive acceleration, and drive torque have to be respected. The controller has to follow the desired trajectories as good as possible while keeping the injection unit within the given limits. This control task is solved by a nonlinear model-predictive control, which allows for an optimal control performance independent of the operating point of the injection unit.

The proposed control concept is implemented on a rapid-prototyping platform and experimentally validated on an industrial injection molding machine.
Keywords: Mathematical model; Process control; Injection molding; Actuators; Polymers; Hydraulic systems; Fasteners
Modellierung und Regelung komplexer dynamischer Systeme
Edited by Univ.-Prof. Dr. Andreas Kugi (TU Wien), o. Univ.-Prof. Dr. Kurt Schlacher (JKU Linz) and Prof. Dr.-Ing. Wolfgang Kemmetmüller (TU Wien), Wien / Linz
Volume 54
Available online documents for this title
DOI 10.2370/9783844079692
You need Adobe Reader, to view these files. Here you will find a little help and information for downloading the PDF files.
Please note that the online documents cannot be printed or edited.
Please also see further information at: Help and Information.
 
 DocumentDocument 
 TypePDF 
 Costs34,35 € 
 ActionDownloadPurchase in obligation and download the file 
     
 
 DocumentTable of contents 
 TypePDF 
 Costsfree 
 ActionDownloadDownload the file 
     
User settings for registered online customers (online documents)
You can change your address details here and access documents you have already ordered.
User
Not logged in
Export of bibliographic data
Shaker Verlag GmbH
Am Langen Graben 15a
52353 Düren
Germany
  +49 2421 99011 9
Mon. - Thurs. 8:00 a.m. to 4:00 p.m.
Fri. 8:00 a.m. to 3:00 p.m.
Contact us. We will be happy to help you.
Captcha
Social Media